News

What is Used Oil?

 EPA's regulatory definition of used oil is as follows: Used oil is any oil that has been refined from crude oil or any synthetic oil that has been used and as a result of such use is contaminated by physical or chemical impurities. Simply put, used oil is exactly what its name implies—any petroleum-based or synthetic oil that has been used. During normal use, impurities such as dirt, metal scrapings, water, or chemicals can get mixed in with the oil, so that in time the oil no longer performs well. Eventually, this used oil must be replaced with virgin or re-refined oil to do the job at hand EPA's used oil management standards include a three-pronged approach to determine if a substance meets the definition of used oil. To meet EPA's definition of used oil, a substance must meet each of the following three criteria:

Origin — the first criterion for identifying used oil is based on the origin of the oil. Used oil must have been refined from crude oil or made from synthetic materials. Animal and vegetable oils are excluded from EPA's definition of used oil.
Use — the second criterion is based on whether and how the oil is used. Oils used as lubricants, hydraulic fluids, heat transfer fluids, buoyants, and for other similar purposes are considered used oil. Unused oil such as bottom clean-out waste from virgin fuel oil storage tanks or virgin fuel oil recovered from a spill, do not meet EPA's definition of used oil because these oils have never been "used." EPA's definition also excludes products used as cleaning agents or solely for their solvent properties, as well as certain petroleum-derived products like antifreeze and kerosene.
Contaminants — the third criterion is based on whether or not the oil is contaminated with either physical or chemical impurities. In other words, to meet EPA's definition, used oil must become contaminated as a result of being used. This aspect of EPA's definition includes residues and contaminants generated from handling, storing, and processing used oil. Physical contaminants could include metal shavings, sawdust, or dirt. Chemical contaminants could include solvents, halogens, or saltwater

Previous: YJ-TY Base oil recycling machine form used engine oil

 Vacuum distillation is a method of distillation whereby the pressure above the liquid mixture to be distilled is reduced to less than its vapor pressure (usually less than atmospheric pressure) causing evaporation of the most volatile liquid(s) (those with the lowest boiling points).[1] This disti......

Next: Used Used Motor Oil Cracking Process For Diesel Production

                                                  Used Used Motor Oil Cracking Process For Diesel Production Oil can be used in many different products, and this is because of its composition of many different hydrocarbons of different sizes, which are individually useful ......